Cobalt Boats Forum

The demo boat project is about to begin.

Your fitting looks similar to the bag of elbows and swivel elbows I was sent with my freshwater tank kit. My fittings have a “THC” embossed on the fitting nut. THC at one time made Flair-It PEX fittings, but Flair-It is now a part of ESCO Elkhart Supply Company. https://www.escousa.net/ https://www....

I added the factory tank a couple of years after I bought our boat. No tank gauge was provided in the kit.

I added an access port in the bottom of the rear seat compartment so I could still do maintenance if needed, but it certainly is not very useful to determining the tank level.

Do you have a dash switch for the macerater? Check for 12 volts at the load side of the switch. Let us know what you find.

I lied. There was more port side work to do. Here Lee goes after the top gunwale on the port side. Also the tricky gelcoat section between the window and bow seats.

My manual shows a 211 bulb for the “dome light” and either 1004 or 211 bulbs for “open bulb utility light”.

Did you do all of the upholstery or just that back seat? Was the carpet already replaced when you bought her? I’ve never been in another 240, but it would be fun to see how the 350 Mag MPI and Bravo 3 combo performed. I have the 496 Mag MPI and Bravo 3 and it puts a smile on my face every time I hit...

Beautiful boat! You have her looking absolutely mint. What engine does she have?

I’m kinda partial to this model and year as you might imagine.

Looks like you’ve done some upholstery work in picture 3 as compared to picture 4?

Nice!

Any pictures of the 3D printed part?

Have you seen what he did with the thrashed and trashed Bayliner?

The entire port side is made into a mirror.

That is good to hear. I’m hoping to use his buffing technique this spring for the first time.

Starboard side in and around the tower supports.

Next up is the starboard gunwale top section near the bow seats.

Lee buffs the white gelcoat between the glass and bow on the starboard side.