Cobalt Boats Forum

If you want Cobalt original stuff it may be available from your Cobalt dealer, but Cobalt typically won't want to sell to you directly.

Just following up. I white flagged it and had a tech check it out during the annual service. It turned out to be a loose deustch connector to the sub - hope this helps someone in the future. Thanks for the suggestions. Thanks for reporting back, and glad we were on the right track with our advice!

I think there are really only a few battery makers out there, labeled as lots of things (Johnson Controls, Delphi, East Penn, Exide?). Johnson controls brands include Duralast, Interstate, Diehard, Kirkland, Motocraft, and others, and I've just bought Interstate dual purpose marine batteries from Co...

There are several vendors out there that will do it, including:

https://matworks.com/pages/standard-duraweave-colors

https://infinitylwv.com/

https://corinthianmarine.com/aquamat/

There are two recent Volvo Penta V8-300 motors out there - the 5.7L (which the 2015 boat likely has, but tweaked a bit to become a V8-320) and the 5.3L (which the 2017 boat likely has). The 5.7L has a cast iron block, is a bit heavier, doesn't have direct port fuel injection but is fuel injected, an...

The V6-280 has variable valve timing and advanced fuel injection that the V8 doesn't, and is a bit lighter (903 vs 1022lb dry) due to its aluminum block and smaller overall size. Add the newer tech like direct port fuel injection, and I don't think I'd feel at all bad about having the V6 280 instead...

The change in boat quality is real, but the amount of change you'll see in the same boat design between 2015 and 2020 probably isn't all that great - your best bet is probably to give each boat a thorough look-over and pick the one that has the fewest problems or flaws and feels right to you. I like...

Shadow caster should be able to integrate with the garmin on the NMEA 2000 backbone. It should also be able to use the factory button to turn on and off as well as the mfd https://www.shadow-caster.com/products/marine-led-lighting-controls/nmea2000-lighting-control-multi-zone-lighting-controller/ N...

I don't have an 8610, but I'm curious how it would be able to change color and dimming of ambient lights. Is there a screen control that suggests it can do that? I think it can control certain marine stereos (e.g. Fusion) over a NEMA2000 network, but it looks like you might need a completely separat...

Have a welder put an attach point further to the outside on your trailer Good idea. If the attachment on the trailer were on the outside of the red beam we see in the photo it might be close. I don't think I'd feel terrible about trimming back the outside edge of the trim tab just a bit if the tie-...

Yeah, it's part of the lever mechanism. If you can post a picture of the throttle control you have it may help people here identify which one it is and help guide you to adjusting it if you choose to do it yourself. It's most likely a screw (hex, if I remember) behind the cap covering where the thro...

Looks like there was space to move that trim tab a bit to the right - not sure why the guy bolting them on didn't see what we all seem to see... It looks like the angle that the hydraulic ram is on, it is already pretty tight at the top end. It might not install correctly if the tab was moved over ...

MN, I'm regretting not taking pictures for you during our 10-day zero degree stretch last week There's fresh ice on the roads this morning - maybe I'll find something to post to make you miss home.

Looks like there was space to move that trim tab a bit to the right - not sure why the guy bolting them on didn't see what we all seem to see...

Good to hear from you. I just went to the Minneapolis boat show last Wednesday. Zero degree weather, but it was fun to go with my son and my dad and pretend it was boat season for a few hours. Erickson had some nice Formula and Tiara models, and I'm always a bit surprised that Scout sells in MN but ...