anchor chain
anchor chain
Any tips on how to mark 10' segments on an anchor chain? Something that won't snag in the windlass. Am having a hard time figuring out length of chain to water depth.
Re: anchor chain
I also have an all chain / windlass setup. I got colored zip ties - 1 at 10', 2 at 20', 3 at 30' and so on. The zip ties go through my windlass just fine.
I have seen people use paint and just paint a section every 10-20ft, but over time the paint wears off and just looks crappy. There are also kits that have colored inserts that fit in the chain links. For me the zip ties work great, mine are different colors, and it's simple - I usually anchor for a few hours, 10-15ft of water and calm conditions, so 30ft - 40ft of chain works fine. Plus if one of the zip ties breaks off (haven't yet) I have a whole bag of replacements that I spent $5 on, not $50 for the fancy link inserts.
I have seen people use paint and just paint a section every 10-20ft, but over time the paint wears off and just looks crappy. There are also kits that have colored inserts that fit in the chain links. For me the zip ties work great, mine are different colors, and it's simple - I usually anchor for a few hours, 10-15ft of water and calm conditions, so 30ft - 40ft of chain works fine. Plus if one of the zip ties breaks off (haven't yet) I have a whole bag of replacements that I spent $5 on, not $50 for the fancy link inserts.
______________________________
2014 Cobalt R5 - Current
1999 SeaRay 185 Bowrider -Previous
2000 SeaRay 290 SunDancer - Previous
1979 Correct Craft Ski-Tique - Previous
1948 Chris Craft Custom Runabout - Oh man to have that one back!
2014 Cobalt R5 - Current
1999 SeaRay 185 Bowrider -Previous
2000 SeaRay 290 SunDancer - Previous
1979 Correct Craft Ski-Tique - Previous
1948 Chris Craft Custom Runabout - Oh man to have that one back!
- jhnmdahl
- Vice Admiral
- Posts: 1915
- Joined: Tue Jan 06, 2015 5:11 pm
- Location: Twin Cities, MN
- Contact:
Re: anchor chain
Colored zip ties are pretty easy and last about as long as paint, but are easier and cheaper to replace than repainting for small boats. One reason I can think of not to do zip ties is if you handle the chain under tension by hand. I've also heard of people weaving colored line through the chain at intervals, which holds up well and is very easy to see, but requires a bit more work up front.
I gave up painting anchor chain during Covid when I couldn't find enough tiny guys to come and work on my chain anymore:
I gave up painting anchor chain during Covid when I couldn't find enough tiny guys to come and work on my chain anymore:
You do not have the required permissions to view the files attached to this post.
Administrator of the www.cobaltchat.com Cobalt boats community forum
2015 210 (Volvo Penta 5.7L V8-225)
2015 210 (Volvo Penta 5.7L V8-225)
Re: anchor chain
I'm in the paint camp. Sure it wears off but it's either in the water or the anchor locker so I don't see it.
2021 Cobalt R5 6.2 380
- Krob1114
- Vice Admiral
- Posts: 1794
- Joined: Sun Jun 09, 2019 8:03 am
- Location: Greer’s Ferry Lake, AR
- Contact:
Re: anchor chain
There was a recent post of a new member painting links of the chain red and blue.
2019 Cobalt R3 @ Greers Ferry Lake, AR
Home in Hernando, MS
Home in Hernando, MS
Re: anchor chain
Thanks for all of the tips.
For the zip tie solution. Does it look like this? (I have a very tight pulpit/windlass set up. And am concerned that even that small bump in the ties will bollix something up.)
For the zip tie solution. Does it look like this? (I have a very tight pulpit/windlass set up. And am concerned that even that small bump in the ties will bollix something up.)
You do not have the required permissions to view the files attached to this post.
Re: anchor chain
I don't have a picture - I can get one tomorrow. But, no I didn't do it like that, I put one zip tie per link, so at 10ft 1 link, 20ft 2 links, 30ft 3 and so on. My zip ties are on the sides of the link not the ends like that picture - not saying that picture is wrong. I have the Lewmar windlass mounted in the anchor locker (R5) that uses 1/4" chain and I have had no issues with the zip ties feeding through the windlass.
______________________________
2014 Cobalt R5 - Current
1999 SeaRay 185 Bowrider -Previous
2000 SeaRay 290 SunDancer - Previous
1979 Correct Craft Ski-Tique - Previous
1948 Chris Craft Custom Runabout - Oh man to have that one back!
2014 Cobalt R5 - Current
1999 SeaRay 185 Bowrider -Previous
2000 SeaRay 290 SunDancer - Previous
1979 Correct Craft Ski-Tique - Previous
1948 Chris Craft Custom Runabout - Oh man to have that one back!
Re: anchor chain
b: Thanks for the explanation. I have a similar set up, so might try your method.
Re: anchor chain
Here is a picture of mine:
You do not have the required permissions to view the files attached to this post.
______________________________
2014 Cobalt R5 - Current
1999 SeaRay 185 Bowrider -Previous
2000 SeaRay 290 SunDancer - Previous
1979 Correct Craft Ski-Tique - Previous
1948 Chris Craft Custom Runabout - Oh man to have that one back!
2014 Cobalt R5 - Current
1999 SeaRay 185 Bowrider -Previous
2000 SeaRay 290 SunDancer - Previous
1979 Correct Craft Ski-Tique - Previous
1948 Chris Craft Custom Runabout - Oh man to have that one back!
Re: anchor chain
b: Thanks for the pic. We have the same windlass. Looks like you put all the squares of the zip ties to the outside. Is that correct? If I understand your method, in that pic you're at 30'. Is that right?
I'm going to use your method. Thank you very much for taking the time to explain it.
I'm going to use your method. Thank you very much for taking the time to explain it.
Re: anchor chain
Yes I put the squares on the outside so they don’t hit going through the windless, but they seem to move and don’t cause a problem - yes it is at 30’ in the picture. I put them on this spring (bought the boat last fall) - we anchor every weekend, sometimes more than once and have had no problems at all. To me just seems like a cheap simple way to mark the chain.
Here is another pic with 40’ out, that rope is my simple snubber to take strain off the windlass and keeps the chain from me making noise as the boat rocks around, it’s jus a 4’ 3 strand rope with a loop on each end - loop it around the chain and the cleat and let a little more chain out so the snubber is tight and the chain has some slack in it. For a few hours in light conditions it works great.
Here is another pic with 40’ out, that rope is my simple snubber to take strain off the windlass and keeps the chain from me making noise as the boat rocks around, it’s jus a 4’ 3 strand rope with a loop on each end - loop it around the chain and the cleat and let a little more chain out so the snubber is tight and the chain has some slack in it. For a few hours in light conditions it works great.
You do not have the required permissions to view the files attached to this post.
______________________________
2014 Cobalt R5 - Current
1999 SeaRay 185 Bowrider -Previous
2000 SeaRay 290 SunDancer - Previous
1979 Correct Craft Ski-Tique - Previous
1948 Chris Craft Custom Runabout - Oh man to have that one back!
2014 Cobalt R5 - Current
1999 SeaRay 185 Bowrider -Previous
2000 SeaRay 290 SunDancer - Previous
1979 Correct Craft Ski-Tique - Previous
1948 Chris Craft Custom Runabout - Oh man to have that one back!
Re: anchor chain
b: Thanks for the snubber pic. Can't do that. It takes too many "ballerina" moves to get to/from the bow. And in my typical anchor conditions, don't really need it.
Again, thanks for all of the zip tie tips.
Again, thanks for all of the zip tie tips.
Re: anchor chain
Haha Ballerina moves. Agree in light conditions a snubber is not really necessary. Your welcome on the zip ties, I think you find they work really well and are cheap!
______________________________
2014 Cobalt R5 - Current
1999 SeaRay 185 Bowrider -Previous
2000 SeaRay 290 SunDancer - Previous
1979 Correct Craft Ski-Tique - Previous
1948 Chris Craft Custom Runabout - Oh man to have that one back!
2014 Cobalt R5 - Current
1999 SeaRay 185 Bowrider -Previous
2000 SeaRay 290 SunDancer - Previous
1979 Correct Craft Ski-Tique - Previous
1948 Chris Craft Custom Runabout - Oh man to have that one back!
Re: anchor chain
This summer we painted our anchor chain every 5 ft in a red, white, blue pattern for 50 of the 75 or so feet of rode that came with the boat.
We used some industrial strength spray paint that hopefully will last 5 years. Yes over time it will wear away but so long as the person running the windlass can see any color it makes anchoring so much easier.
We used some industrial strength spray paint that hopefully will last 5 years. Yes over time it will wear away but so long as the person running the windlass can see any color it makes anchoring so much easier.
You do not have the required permissions to view the files attached to this post.
Minneapolis, MN
2004 Glastron GX 195 (sold)
2019 Chaparral 21H20 OB (sold)
2023 Cobalt R8 Surf
2004 Glastron GX 195 (sold)
2019 Chaparral 21H20 OB (sold)
2023 Cobalt R8 Surf
Re: anchor chain
". . . we painted our anchor chain . . ."
That's what I ended up doing. (Shh, don't tell billk.)
That's what I ended up doing. (Shh, don't tell billk.)
Who is online
Users browsing this forum: No registered users and 0 guests