Changing oil
- jhnmdahl
- Vice Admiral
- Posts: 1914
- Joined: Tue Jan 06, 2015 5:11 pm
- Location: Twin Cities, MN
- Contact:
Changing oil
I have the V8 5.7l Volvo Penta in my 210, and did my first winterizing last weekend. Part of that was pumping out the oil the boat came with, and refilling with Mobil 1 15w-50 (Volvo says any 30w or higher is fine, but no 0w-30). It went pretty slick, but it did take about 10 minutes for the pump to remove all the oil from the engine through the dipstick tube (oil was not hot).
The nice part is you don't have to pump continuously, or even very often - just pump enough to create a good vacuum in the changer at the start, and sit back and watch the oil move. I used a Marpac fluid extractor, like the one here: http://www.defender.com/product3.jsp?pa ... id=1345777 which includes a tube that can be inserted through the dipstick tube and a hose connection that can simply be screwed onto the top of the dipstick tube (as pictured below).
The nice part is you don't have to pump continuously, or even very often - just pump enough to create a good vacuum in the changer at the start, and sit back and watch the oil move. I used a Marpac fluid extractor, like the one here: http://www.defender.com/product3.jsp?pa ... id=1345777 which includes a tube that can be inserted through the dipstick tube and a hose connection that can simply be screwed onto the top of the dipstick tube (as pictured below).
You do not have the required permissions to view the files attached to this post.
Administrator of the www.cobaltchat.com Cobalt boats community forum
2015 210 (Volvo Penta 5.7L V8-225)
2015 210 (Volvo Penta 5.7L V8-225)
- Big Block Power
- Fleet Admiral
- Posts: 17904
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Changing oil
John I wish I could find that adaptor for the dip stick tube. Do you have any leads?
I just bought a new 12v pump to try.I always had the vacuum pump one also. I figure for under $20 with a try. It had ok reviews on it.
I just bought a new 12v pump to try.I always had the vacuum pump one also. I figure for under $20 with a try. It had ok reviews on it.
You do not have the required permissions to view the files attached to this post.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
- Big Block Power
- Fleet Admiral
- Posts: 17904
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Changing oil
I bought a washer machine hose cut it in half with a few adaptors just to make sure it had some clearance on the dipstick tube. Not sure if I really needed too. after I ran the boat all day yesterday I decided to drain the oil with this pump and I got 6qts it in about 2 minutes. It worked awesome and no mess. I think I paid under $20 for that pump and $10 in the washer hose. I'm set now for awhile.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
- jhnmdahl
- Vice Admiral
- Posts: 1914
- Joined: Tue Jan 06, 2015 5:11 pm
- Location: Twin Cities, MN
- Contact:
Re: Changing oil
I don't have any great leads unfortunately - everything I have came in the box with the manual extractor pump. I sort of like that it's manual and fairly simple, and it doesn't take many pumps to get a good vacuum going. I think mine was maybe $50-60 with shipping.
Administrator of the www.cobaltchat.com Cobalt boats community forum
2015 210 (Volvo Penta 5.7L V8-225)
2015 210 (Volvo Penta 5.7L V8-225)
Re: Changing oil
Great stuff here.
Yes, I have always used the Moeller vacuum pump with extractor tube.
Thx gents.
Yes, I have always used the Moeller vacuum pump with extractor tube.
Thx gents.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
- Big Block Power
- Fleet Admiral
- Posts: 17904
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Changing oil
Changed my oil and filter today after the day on the water. I figured the oil is warm and I think I'll only get out one more time. It's warm out so just get it done. Five minutes done and no mess I really like that pump and the washer hose I have converted to fit my dipstick. Fuel is stabilized before I hit the water.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Re: Changing oil
.
...you mean you guys don't pull your engine out of the boat to change the oil?
Lightweights.
.
...you mean you guys don't pull your engine out of the boat to change the oil?
Lightweights.
.
You do not have the required permissions to view the files attached to this post.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
Re: Changing oil
Classic...
Now you can flip er over and do that pesky oil filter..
2008 272 , 496 HO fo SHO
California Delta
Table Rock Lake
#FARCON
California Delta
Table Rock Lake
#FARCON
- Big Block Power
- Fleet Admiral
- Posts: 17904
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Changing oil
Lmao
Just don't poke a hole in it first if you do it that way now.
Lightweight.really that tiny low hp engine wouldn't be going back in if I was that far. I'd make a second trip to the bank.lol
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Re: Changing oil
Big Block Power wrote: ↑Sun Sep 24, 2017 7:26 pmLmao
Just don't poke a hole in it first if you do it that way now.
Lightweight.really that tiny low hp engine wouldn't be going back in if I was that far. I'd make a second trip to the bank.lol
Well,
I could add a whipple supercharger and get 75mph out of her like this gentleman did to his. 263:
.
You do not have the required permissions to view the files attached to this post.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
- Big Block Power
- Fleet Admiral
- Posts: 17904
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Changing oil
Or add twin turbos
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Re: Changing oil
Nah,
One's enough.
Otherwise major uprgrades to the engine components to handle it.
Plus, my bank account is already stressed to the limit.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
- Big Block Power
- Fleet Admiral
- Posts: 17904
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Changing oil
It still cool to look at it.
You do not have the required permissions to view the files attached to this post.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Re: Changing oil
Yes it is!
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
- jhnmdahl
- Vice Admiral
- Posts: 1914
- Joined: Tue Jan 06, 2015 5:11 pm
- Location: Twin Cities, MN
- Contact:
Re: Changing oil
Aslan, I've wondered if an Eaton TVS supercharger would be a good fit for a boat like a Cobalt that runs on a gas engine. I suspect in another 5-10 years we'll start to see more of them as manufacturers try to bring weight down and boost efficiency, much like what's going on in cars now.
I still can't believe sometimes we tow our boat with a 180 cu. in. (3L) engine in our Tourareg...
John
I still can't believe sometimes we tow our boat with a 180 cu. in. (3L) engine in our Tourareg...
John
Administrator of the www.cobaltchat.com Cobalt boats community forum
2015 210 (Volvo Penta 5.7L V8-225)
2015 210 (Volvo Penta 5.7L V8-225)
Who is online
Users browsing this forum: No registered users and 0 guests