Page 2 of 2

Re: Tach gone whacko

Posted: Sat Feb 04, 2023 1:38 pm
by xlint89
Big Block Power wrote: ↑Fri Feb 03, 2023 4:51 pm
bruceb58 wrote: ↑Fri Feb 03, 2023 2:02 pm
TwoDuckDad wrote: ↑Fri Feb 03, 2023 11:02 amSecond, one must plug the black hose that went to the old speedo that is not used on a GPS speedo or it will leak.
Better yet, completely remove it.
It's a new option! A cockpit shower! πŸ˜‚πŸ˜‚πŸšΏ
Hydration station.


One thing to note, the GPS speedo should be LED back lit and will not dim if you use that feature

Re: Tach gone whacko

Posted: Sun Feb 05, 2023 6:35 pm
by TwoDuckDad
Titaniumboy wrote: ↑Fri Feb 03, 2023 3:47 pm Any pictures of the instrument cluster after the speedometer install? I’m curious how well the new speedometer matches the original gauges.

I'll try to get a photo soon.

How much would this cost me if I wanted to upgrade the twin of your boat?

I don't understand the question.

Re: Tach gone whacko

Posted: Sun Feb 05, 2023 9:14 pm
by Titaniumboy
How much would it cost me to put in a GPS speedometer in my 2007 240?

Re: Tach gone whacko

Posted: Mon Feb 06, 2023 2:33 pm
by bruceb58
Titaniumboy wrote: ↑Sun Feb 05, 2023 9:14 pm How much would it cost me to put in a GPS speedometer in my 2007 240?
Amazon carries them. Looks like $95. There are a lot to chose from.

www.amazon.com/Faria-33749-Chesapeake-B ... 506&sr=8-5

Re: Tach gone whacko

Posted: Mon Feb 06, 2023 3:40 pm
by Titaniumboy
Dang it. I had no idea that the GPS speedometers were priced so reasonably. For some reason I had thought they were $300 or $400. Now I don’t have an excuse not to upgrade. It sure would be nice to see the true speed below 20 mph.

Maybe the new GPS speedometer won’t match well with the existing gauges and I can find a new excuse? We need pictures!

Re: Tach gone whacko

Posted: Mon Sep 25, 2023 8:41 am
by jwill323
Just a quick thanks for this post! My Starboard tach was all over the place, I got in behind the dash this past weekend to turn the pole setting dial as advised above which i did and discovered that the tach was also set incorrectly. Turned it back and forth a couple times then set it correctly and my problem is fixed! Also swapped out all my gauge lights to LED and the whole thing looks and functions perfect. Thanks again, its the things like this that really is the value of these forums!

Also quick note on the Faria Tach;
1 = 4 CYL
2 = 6 CYL
3 = 8 CYL

Re: Tach gone whacko

Posted: Mon Sep 25, 2023 12:47 pm
by AsLan7
Great to hear jw....
Thanks for the follow up too. The site is on a roll with folks fixing their issues...and posting the results.
Enjoy that lake!