220 Fender "Silos" - Options?

(190 through 360)
Post Reply
Canterbury
Lieutenant
Lieutenant
Posts: 38
Joined: Tue Oct 05, 2021 10:44 am
Location: Boston
Contact:

220 Fender "Silos" - Options?

Post by Canterbury »

Hi All,

I saw the other thread about the 98 220 fender holders which got me to thinking, but didnt want to hijack that one. I have a 2007 220 and the Fender "Silos" have such a small diameter, they are pretty useless. The boat protection offered by the smaller fenders that fit would be minimal, so I would assume other owners use larger sizes and toss them in the seat lockers like I do.

Has anyone come up with a good alternative use for these? I am sure storage for empties tops the list, but curious about any novel ideas. The other thread had shown a sock type piece that was a DIY project. The hatch and latch are permanent but can the tube be removed and replaced? With the number of Cobalts in the 200 - 240 range that use the same setup, maybe there is an aftermarket piece or a simple DIY?

Enjoy the day.
capn272
Commander
Commander
Posts: 124
Joined: Sun May 10, 2020 5:03 pm
Location: NW Arkansas
Contact:

Re: 220 Fender "Silos" - Options?

Post by capn272 »

I use the tubes in my 272 for dock lines.. that's about it. The big blue fenders are in the ski locker.
1998 272
502 Mag MPI + B1
Humongous trailer
User avatar
Big Block Power
Fleet Admiral
Fleet Admiral
Posts: 17910
Joined: Sat May 07, 2016 8:05 pm
Location: Neenah,Wi
Contact:

Re: 220 Fender "Silos" - Options?

Post by Big Block Power »

capn272 wrote: Tue Apr 04, 2023 11:08 am I use the tubes in my 272 for dock lines.. that's about it. The big blue fenders are in the ski locker.
X2
I tied them shorter so you don't have to reach down as far. The bad thing is they leak when it rains and those compartments get wet. I've tried to put weatherstrips in place but it has not worked 75% yet.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
tr220
Ensign
Ensign
Posts: 15
Joined: Mon Feb 25, 2019 4:39 pm
Location: TRL Missouri
Contact:

Re: 220 Fender "Silos" - Options?

Post by tr220 »

I have a 2006 220. I discovered that one of my fenders (Taylormade) is slightly smaller in diameter than the other. I was able to pick up another that was also smaller. They are not precision machined. I let a little air out to help and I waxed the inside of the tube. They are still a snug fit, but with a little water on them they slide in fine.
2006 220 5.7 GI-E DP
Table Rock Lake, Missouri
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests